The Compleat Sculptor
" You supply the talent, we'll supply the rest!" Since 1995

Resilpom™ Putty

Overview
A carefully guarded secret of Italian mold-makers for fifteen years, this silicone-based putty is hand sculpted instead of poured, will reduce your mold-making time by 50%, eliminate waste, and enable you to capture incredibly fine detail with molds that are far lighter than anything you can produce now. It is now available in the United States exclusively through The Compleat Sculptor, Inc. See also Resilpom Liquid.
RESILPOM is a two-component, room-temperature (RTV), condensation-curing silicone compound. Beginning as a pasty mass, once cured, it becomes a strong molding compound with good mechanical properties and considerable dimensional stability. Mix RESILPOM (buff colored) with either the fast catalyst (red) in a 50:1 ratio by weight (98% base to 2% catalyst) or the regular catalyst (yellow) in a 19:1 ratio by weight (95% base to 5% catalyst). Mix small quantities to avoid waste from pre-polymerization. Proper mixing has occurred when the color is uniform.
This material is ideal for vertical surfaces due to its pasta-like nature. RESILPOM can be applied directly to the model, removed easily and cast in one day. RESILPOM has already been used to reproduce sensitive pieces in the antique and archeological industries. The variety of materials that can be cast into RESILPOM is large, including but not limited to Gypsum, Polyurethane Resin, Wax, Cement, Epoxy Resin, Forton MG, Other Rubbers and Low Temperature Metals.
Purchase Information
Order #
Description
Weight
Price
Buy Me
89001
 1 kilo Resilpom base + 50g Slow Catalyst
2.2 lbs
$49.99
89005
 5 kilos Resilpom base + 250g Slow Catalyst
11 lbs
$229.99
89010
 10 kilos Resilpom base + 500g Slow Catalyst
22 lbs
$439.99
89020
 20 kilos Resilpom base + 1 kilo Slow Catalyst
44 lbs
$859.99
Extra Catalyst
Order #
Description
Size
Price
Buy Me
89505
Slow Catalyst
50g
$12.99
89510
Slow Catalyst
100g
$19.99
89F050
Fast Catalyst
50g
$14.99
Note for distributors
The Compleat Sculptor is always interested in finding distributors around the world. If you are interested in distributing Resilpom, please contact us via email at tcs@sculpt.com.


Although we try to keep the most updated prices on our website, all prices are subject to change.
1-800-9-SCULPT